Pediatric Dentist and Orthodontist

It was a pleasure to provide the flooring for a Palm Harbor pediatric dentist and orthodontist office.  We contoured the glass to the radius of the entry wall.  We used a flexible metal transition to separate between the carpet and porcelain wood.  We ramped the substrate so that the carpet and tile would have the same finished height (to avoid any trip hazards).  The wood-looking porcelain tile ran from one contiguous area to the next without transitions.  The linear appearance of the carpet and wood-porcelain were run in the building's length as a complimentary layout.

Soft Surface:  Commercial Carpet

  • Manufacturer:  Mannington
  • Style:  Axio
  • Collection:  Miiamo II
  • Color:  Expedition 82061
  • Format:  Tufted Broadloom (Width:  12'-6")
  • Yarn:  100% Invista Antron Legacy Type 6,6 Four Hole, Hollow Filament Nylon
  • Construction: Patterned Loop Pile
  • Face Weight:  22 Ounces/SY
  • Pattern Repeat:  18-3/4" x 27-3/4"
  • Feature:  ColorSafe Bleach and Stain Resistant.
  • Installation Method:  Direct-glue Installation

Hard Surface:  Porcelain Ceramic Tile as Faux Wood

  • Manufacturer:  Iris U.S.
  • Style:  French Wood 6" x 24" Porcelain Tile
  • Color:  Beech US IRG0624121
  • Tile Size:  ~5/16 inch x 6 inches x 24 inches
  • Edge:  Rectified
  • Hardness (Mohs):  7
  • Finish:  Matte
  • Layout:  Straight with a Unique Offset (Less Than 33 Percent)
  • Feature:  Water, Stain, Chemical, Thermal, and Frost Resistant
  • Installation Method:  Thin-set Installation with 1/8-Inch Grout Joints
  • Transitions:  Schluter's Jolly Transition with Satin Nickel Finish

Vertical Surface:  Glass Mosaic for the Entry Wall

  • Manufacturer:  Unknown
  • Color:  Blue
  • Tile Size: ~1" x 3" (Mesh Mounted Sheets)
  • Edge: Micro Bevel
  • Finish: Glossy
  • Layout: Brick Vertical or 50 Percent Offset with Rectangular Tiles
  • Installation Method:  Thin-set Installation with 1/16-Inch Grout Joints
  • Transitions:  Schluter's Jolly Transition with Satin Nickel Finish

Laboratory:  Commercial Sheet Vinyl

  • Manufacturer:  Armstrong
  • Style:  Medintech 88416
  • Color:  Almond
  • Roll Width:  6 Feet
  • Seams:  Heat Welded
  • Construction:  Homogeneous Sheet Vinyl
  • Overall Thickness & Wear Layer:  0.080 Inch (2.0 mm)
  • Finish:  UV-cured Polyurethane
  • Key Benefit:  Impervious Sheet Goods with Limited Seams Perfect for Aseptic Areas
  • Installation Method:  Direct-glue Installation
  • Wall Base Molding:   Armstrong's 2-1/2" Vinyl Base (Color:  65 Soft White) in an 1/8-inch Gauge

The customer also purchased 4' x 6' sheets of 100% solid rubber measuring 3/8" or 10 mm in thickness to absorb vibrations or movement in the dental chairs.

Market Sector:  Health Care